Welcome to Amiga Game Selector v2.6
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
			 
Requirements
============
Commodore Amiga A1200
PiStorm32 Lite with compatible Raspberry Pi
Kickstart 3.0+
2MB Ram
Joystick / Controller
Mouse
A 32GB Compact Flash or SD Card
Win32 Disk Imager or Balena Etcher

Installation
============

1.  Extract the AGS_Pistorm32_v26.img file onto your hard disk.

2a. Win32 Disk Imager - Insert you blank SD/CF Card into you PC and make a
    note of the drive letter. Open Win32 Disk Imager. Select the memory card
	from the 'Device' dropdown in the top right of the window. Next click the
	blue file button and find the AGS_Pistorm32_v26.img file. Finally press the 
	'Write' button and wait.
	
2b. Balena Etcher - Insert you blank SD/CF Card into you PC and make a
    note of the drive letter. Open Balena Etcher. Select 'Flash from file' and 
	pick the AGS_Pistorm32_v26.img file. Select the memory card
	from the 'Select Target' button. Next click the
	blue file button and find the AGS_Pistorm32_v26.img file. Finally press the 
	'Flash!' button and wait.
		
3. Plug the memory card into your PiStorm and turn your Amiga on.

4. Please read the included documents!