Welcome to Amiga Game Selector v2.6
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
			 
Requirements
============
Raspberry Pi5, Controller & Mouse
A 64GB USB Flash Drive or SD Card
Win32 Disk Imager or Balena Etcher

Installation
============

1.  Extract the AGS_Pi5_v26.img file onto your hard disk.

2a. Win32 Disk Imager - Insert your blank SD Card into you PC and make a
    note of the drive letter. Open Win32 Disk Imager. Select the SD Card
	from the 'Device' dropdown in the top right of the window. Next click the
	blue file button and find the AGS_Pi5_v26.img file. Finally press the 
	'Write' button and wait.
	
2b. Balena Etcher - Insert you blank SD Card into you PC and make a note of the
    drive letter. Open Balena Etcher. Select 'Flash from file' and pick the
	AGS_Pi5_v26.img file. Select the memory card from the 'Select Target'
	button. Finally press the 'Flash!' button and wait.

3. Plug the SD card into your Raspberry Pi5 and turn it on.

4. Please read the included documents!