Welcome to Amiga Game Selector v2.3
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
			 
Requirements
============
Commodore Amiga
Kickstart 3.0+
2MB Ram
Joystick / Controller
Mouse
A 16GB USB Flash Drive or SD Card (32GB recommended)
Win32 Disk Imager or Raspberry Pi Imager

Installation
============

1 . Extract the AGS_RHW_v23.img file onto your hard disk.

2a. Win32 Disk Imager - Insert you blank SD/CF Card into you PC and make a
    note of the drive letter. Open Win32 Disk Imager. Select the memory card
	from the 'Device' dropdown in the top right of the window. Next click the
	blue file button and find the AGS_RHW_v23.img file. Finally press the 
	'Write' button and wait.
	
2b. Raspberry Pi Imager - Win32 Disk Imager - Insert you blank memory card
    into you PC and make a note of the drive letter. Open Raspberry Pi Imager.
	Press the 'CHOOSE OS' button. Scroll down the list and select 'Use custom'.
	From the file requester select the AGS_RHW_v23.img file. Choose your memory
	from the 'CHOOSE STORAGE' button. Finally press the 'WRITE' button and
	wait.
	
   ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
	
3. IMPORTANT! You MUST copy over the required kickstarts before starting AGS or
   you will get errors and most games in AGS won't load. Details can be found in
   the 'Needed Kickstarts.txt' file included in the AGS_RHW archive.
   
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

4. Plug the memory card into your Amiga and turn it on.